Brookstone Clock 643403 User Manual

®
iDesign  
Retro Clock  
App-driven dock for iPod®  
& iPhone® devices  
 
caUTIon  
TO ReDUCe THe RisK OF eLeCTRiC sHOCK, DO nOT ReMOVe COVeR  
THeRe ARe nO seRViCeABLe PARTs insiDe  
TO ReDUCe THe RisK OF FiRe OR eLeCTRiC sHOCK, DO nOT eXPOse  
THis UniT TO RAin OR MOisTURe  
The lightning flash with arrow-head symbol within an equilateral triangle  
is intended to alert the user to the presence of uninsulated “dangerous  
voltage” within the unit’s enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the unit  
IMPoRTanT safeTY InsTRUcTIons  
All the safety and operating instructions should be read, adhered to and followed  
before the unit is operated  
save These InsTRUcTIons  
 
2
IMPoRTanT safeTY InsTRUcTIons  
All the safety and operating instructions should be read, adhered to and followed  
before the unit is operated  
1  Read these instructions  
2  Keep these instructions  
3  Heed all warnings  
4  Follow all instructions  
5  Do not use this unit near water  
6  Clean only with a dry cloth  
7  Do not block any ventilation openings  install in accordance with the  
manufacturer’s instructions  
8  Do not install near any heat sources such as radiators, heat registers, stoves,  
or other unit (including amplifiers) that produce heat  
9  Do not defeat the safety purpose of the polarized or grounding-type plug  
A polarized plug has two blades, with one wider than the other  A grounding-  
type plug has two blades and a third grounding prong  The wide blade or the  
third prong are provided for your safety  if the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet  
10  Protect the power cord from being walked on or pinched, particularly at  
plugs, convenience receptacles, and the point where it exits from the unit  
11  Only use attachments/accessories specified by the manufacturer  
 
3
12  Unplug this unit during lightning storms or when unused for long  
periods of time  
13  Refer all servicing to qualified service personnel  servicing is required when  
the unit has been damaged in any way, including if the power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the unit,  
the unit has been exposed to rain or moisture, does not operate normally,  
or has been dropped  
Note:  
1  The unit shall not be exposed to dripping or splashing liquids  
2  Main plug is used as disconnect device and it should remain readily  
operable during intended use  in order to disconnect the unit from the  
power completely, the main plug should be disconnected from the main  
socket outlet completely  
WaRnInG  
1  Keep away from children  This is not a toy  
2  Use this unit only for its intended use as described in this manual  
3  Unplug this unit during lightning storms or when unused for long  
periods of time  
4  never drop or insert an object into any opening  
5  Protect the power cord from being walked on or pinched, particularly at plug  
outlets, convenience receptacles and the point where it exits the unit  
 
4
fcc InfoRMaTIon  
This equipment has been tested and found to comply with the limits for a Class B  
Digital Device, pursuant to Part 15 of the FCC Rules  These limits are designed to  
provide reasonable protection against harmful interference in a residential installation  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communications  However, there is no guarantee that interference will not  
occur in a particular installation  
if this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more  
of the following measures:  
Reorient or relocate the receiving antenna  
increase the distance between the equipment and receiver  
Connect the equipment to an outlet on a circuit different from that  
to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
This equipment complies with Part 15 of the FCC Rules  Operation is subject  
to the following two conditions:  
1  This equipment may not cause harmful interference  
2  This equipment must accept any interference received, including interference  
that may cause undesired operation  
Modifications not authorized by the manufacturer may void the user’s authority  
to operate this device  
 
5
locaTIon of PaRTs and conTRols  
1  Clip Dock  
2  30-Pin Connector  
3  speakers (2)  
4  snooze Button  
3
5  Volume —/+  
1
2
Front view  
5
4
Top view  
 
6
locaTIon of PaRTs and conTRols  
1  Line-in Jack  
2  DC 5V Jack  
2
1
Back view  
InclUded accessoRIes  
DC Adapter  
and Cord  
6 iPod/iPhone Clips  
 
7
seT-UP and oPeRaTIon  
AC POWeR  
Connect the DC Adapter to a power outlet and  
the DC in on the Retro Clock  
CONNeCtINg yOuR iPod/iPhone  
tO tHe RetRO ClOCk  
select the correct iPod/iPhone CLiP for your  
iPod/iPhone and slide it securely into the docking  
area on the front of the unit (see the example to  
the right)  
slide the CLiP down onto the CLiP DOCK  
slide your iPod/iPhone down through the CLiP and securely on the  
30-Pin COnneCTOR  
PlAyINg yOuR iPod/iPhone  
1  Dock your iPod/iPhone  
2  Adjust the volume using the + or — buttons  
coMPaTIble iPod/iPhone Models  
iPhone 3gs  
iPhone 3g  
iPhone  
iPod touch  
iPod nano  
(1st, 2nd and 3rd generation)  
(4th and 5th generation)  
iPod classic  
iPhone 4  
 
8
sM  
UsInG The aPP (free download from app store )  
The app includes alarm clock, weather forecast and more  
When you dock your iPod/iPhone in the unit, a pop-up  
asking if youd like to download the free iDesign® Retro Alarm  
Clock app will appear  
You may also go directly to the iTunes® App storesM  
to download the iDesign® Retro Alarm Clock app  
Note: For all compatible iPod/iPhone devices the  
OS must be 3.1.2 or later to work with the app.  
APP tIPS  
sCReens  
swipe Left/Right to go to:  
Home  
Photo  
Date  
Alarm  
Weather  
World Time  
Music  
Double tap on screen to activate a split screen  
swipe left/right to change screens  
Double tap to return to full screen  
Horizontal orientation will automatically show a split screen  
Touch to access Wall Paper settings  
Touch  
to customize screen  
 
9
ALARM  
in the vertical orientation of any screen, touch  
Or, swipe left/right to go to the Alarm screen  
Touch Alarm to activate and deactivate  
to access Alarms  
WORLD TiMe  
swipe up/down on the cities list to view additional cities on the World Time screen  
MUsiC  
Touch Playlist to access your music  Touch songs to create a custom playlist  
or choose a current playlist and Add All songs  
HORizOnTAL ORienTATiOn  
some screens are view only in the horizontal orientation  For full-feature function,  
use the vertical orientation  
UsInG lIne-In  
1  insert one end of a 3 5mm CABLe (not included) into your audio source  
and the other end into Line in jack on the back of the Retro Clock  
2  Adjust the volume using the + or — buttons  
 
10  
sPecIfIcaTIons  
Output:                                                                             Total 6W output (3W x 2)  
Range:                                                                             2" full range drivers, 34mm  
Distortion:                                                                       < = 10%  
s/n ratio:                                                                       > 75dB @ 0 5W  
sensitivity                                                                        350mV +/- 2mV  
Frequency Response:                                                 200Hz – 15kHz  
Power Adapter:                                                             DC 5V 2 5A  
Dimensions                                                                     6" h x 6" w x 3" d  
Weight                                                                              12 6 oz  
App Data Usage                                                            Approx  8 6MB per month  
iPod/iPhone not included  iPod and iPhone are trademarks of Apple inc , registered in the U s  and  
other countries  “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been  
designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer  
to meet Apple performance standards  Apple is not responsible for the operation of this device or its  
compliance with safety and regulatory standards  Please note that the use of this accessory with iPod  
or iPhone may affect wireless performance  iTunes is a trademark of Apple inc , registered in the U s  
and other countries  App store is a service mark of Apple inc  
 
11  
TRoUbleshooTInG  
PROBlem  
SOlutION  
sound not clear  
or no sound  
Check the DC Cable  
or iPhone/iPod connection  
no power  
Check the DC Cable  
sound is faint/too  
much distortion  
Press Volume Buttons  
to adjust volume  
Adjust the volume of audio  
device attached to the device  
via the 3 5mm Line-in Cable  
Cannot hear music  
played from iPhone/iPod  
Make sure the Line-in Cable  
is unplugged  
increase volume  
Fonts on app using iPod  
touch (1st generation) and  
iPhone (1st generation)  
appear incorrect  
This is a software limitation  
between the iDesign® Retro app  
and the iPod touch (1st generation)  
and iPhone (1st generation)  
 
12  
one (1) YeaR lIMITed WaRRanTY  
Brookstone® warrants this product against defects in materials and/or workmanship  
under normal use for a period of One (1) YeAR from the date of purchase by the  
original purchaser (“Warranty Period”)  if a defect arises and a valid claim is received  
within the Warranty Period, at its option, Brookstone will either 1) repair the defect  
at no charge, using new or refurbished replacement parts, or 2) replace the product  
with a new product that is at least functionally equivalent to the original product, or  
3) provide a store credit in the amount of the purchase price of the original product  
A replacement product or part, including a user-installable part installed in accordance  
with instructions provided by Brookstone, assumes the remaining warranty of the  
original product  When a product or part is exchanged, any replacement item becomes  
your property and the replaced item becomes Brookstones property  When a store  
credit is given, the original product must be returned to Brookstone and becomes  
Brookstones property  
ObtainingService:Toobtainwarrantyservice,callBrookstoneLimitedWarrantyserviceat  
1-800-292-9819  Please be prepared to describe the product that needs service and  
the nature of the problem  A purchase receipt is required  All repairs and replacements  
must be authorized in advance  service options, parts availability and response times  
will vary  You are responsible for delivery and the cost of delivery of the product or any  
parts to the authorized service center for replacement, per our instructions  
limits and exclusions: Coverage under this Limited Warranty is limited to the United  
states of America, including the District of Columbia and the U s  Territories of  
guam, Puerto Rico, and the U s  Virgin islands  This Limited Warranty applies only  
to products manufactured for Brookstone that can be identified by the “Brookstone”  
trademark, trade name, or logo affixed to them or their packaging  The Limited  
Warranty does not apply to any non-Brookstone products  Manufacturers or  
suppliers other than Brookstone may provide their own warranties to the purchaser,  
 
13  
but Brookstone, in so far as permitted by law, provides these products “as is ”  
This warranty does not apply to: a) damage caused by failure to follow instructions  
relating to product’s use or the installation of components; b) damage caused by  
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage  
caused by service performed by anyone who is not a representative of Brookstone;  
d) accessories used in conjunction with a covered product; e) a product or part  
that has been modified to alter functionality or capability; f) items intended to be  
periodically replaced by the purchaser during the normal life of the product including,  
without limitation, batteries or light bulbs; g) any product sold “as is” including, without  
limitation, floor demonstration models and refurbished items; or h) a product that is  
used commercially or for a commercial purpose  
BROOkStONe SHAll NOt Be lIABle FORINCIDeNtAl ORCONSeQueNtIAl  
DAmAgeS ReSultINg FROm tHe uSe OF tHIS PRODuCt, OR ARISINg  
Out OF ANy BReACH OF tHIS WARRANty. tO tHe eXteNt PeRmItteD By  
APPlICABle lAW, BROOkStONe DISClAImS ANy AND All StAtutORy OR  
ImPlIeD WARRANtIeS, INCluDINg, WItHOut lImItAtION, WARRANtIeS  
OF meRCHANtABIlIty, FItNeSS FOR A PARtICulAR PuRPOSe AND  
WARRANtIeS AgAINSt HIDDeN OR lAteNt DeFeCtS. IF BROOkStONe  
CANNOt lAWFully DISClAIm StAtutORy OR ImPlIeD WARRANtIeS, tHeN  
tO tHe eXteNt PeRmItteD By lAW, All SuCH WARRANtIeS SHAll Be  
lImIteD IN DuRAtION tO tHe DuRAtION OF tHIS eXPReSS WARRANty.  
some states disallow the exclusion or limitation of incidental or consequential damages  
or how long an implied warranty lasts, so the above exclusions or limitations may not  
apply to you  This warranty gives you specific legal rights and you may also have other  
rights, which vary from state to state  
 
14  

Black Box Computer Hardware NEMA 12 User Manual
Black Box Switch 5 and 8 port USB 10 100 switches User Manual
Black Decker Fan BDHF551 User Manual
Bosch Appliances Kitchen Utensil MS 4200 User Manual
Bryant Furnace 393AAV User Manual
Canon All in One Printer PIXMA MG7520 User Manual
Carrier Air Conditioner 38APD025 100 User Manual
Chamberlain Home Security System 942FPC User Manual
Chauvet Marine Lighting FC T User Manual
Chicago Electric Welder 8878 User Manual