Instruction Sheet
#2801 Versi Bracket
On-Camera Flash Bracket for Your Polycarbonate
and Octa PLUS Speed Rings
Includes:
• Versi Bracket with off set base
• Accessory Shoe
• 3 - Threaded thumb screws
• Mount for Polycarbonate
Speed Ring
• Mount for Octa Speed Ring &
2- screws
4-pole Poly
mount
Height Adjustment
Lock Knob
8-pole Octa
mount
Assemble the appropriate mounting plate to the front of the
bracket upright with the black knurled adjustment lock knob.
Two mounts are supplied. One for mounting a Polycabonate
4-pole Speed Ring (with a thumb screw) and one for mounting
the OctaPlus 8-pole Speed Ring (using the two supplied Phillips
screws).
Mount the Accessory Shoe to the Versi Bracket with thumb
screws. Multiple mounting holes on the bracket base allow po-
sitioning your flash at the correct distance from the Speed Ring.
Use the extra thumb screw under the accessory shoe to add 1/2”
to raise flash position, if needed.
Attach your flash unit onto the Accessory Shoe and adjust the
flash height to center the reflector in the Speed Ring opening.
The bracket off set allows the use of Pocket Wizard’s Flex TT5
while centering the flash. You are now ready to attach your
Lightbank to the Speed Ring.
Pocket Wizard
Flex TT5
Octa PLUS
Set Up
Options:
• You can use the #2688 Slave Adapter (optional) to mount
other radio receivers.
• The thumb screw has a threaded bottom hole to accept op-
tional 1/4-20 stand adapter studs for placing on a light stand.
• Ideally suited for the Mini and Maxi, as well as the Octa 2
Beauty Dish.
#2688
library for more information.
CHIMERA 1812 Valtec Lane, Boulder, CO 80301
303-444-8000 FAX 303-444-8303 888-444-1812
|